Supermicro B1SD2-TF, Руководство пользователя

Страница: 60 / 93

4-16
B1SD2-TF Motherboard User’s Manual
SATA Port 0 ~ Port 4
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0 ~ Port 4 Hot Plug
This feature designates this port for hot plugging. Set this item to Enabled for
hot-plugging support, which will allow the user to replace a SATA drive without
shutting down the system. The options are Enabled and
Disabled .
Port 0 ~ Port 4 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to initialize the
device. The options are Enabled and
Disabled .
Port 0 ~ Port 4 SATA Device Type
Use this item to specify if the SATA port specified by the user should be con -
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
*If the item above "Configure SATA as" is set to IDE, the following items
will display:
Port 0 ~ Port 4 SATA Device Type (Available when a SATA port is
detected)
Use this item to specify if the SATA port specified by the user should be con -
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.

Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
General ME Configuration
•
Operational Firmware Version
•
ME Firmware Type
•
Recovery Firmware Version
•
ME Firmware Features
PCI ROM Priority
When there are multiple Option ROMs (Lega-
cy and EFI compatible), this feature specifies
what Option ROM to launch. The options are
Legacy ROM
and EFI Compatible ROM.