20
AS-2113S-WN24RT User's Manual
Releasing the Inner Rail
Releasing Inner Rail from the Outer Rails
1. Identify the left and right outer rail assemblies as described on the previous page.
2. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
3. Press the locking tab down to release the inner rail.
4. Repeat steps 1-3 for the second outer rail.
Installing The Inner Rails on the Chassis
Installing the Inner Rails
1.
Confirm that the left and right inner rails have been correctly identified.
2.
Place the inner rail firmly against the side of the chassis, aligning the hooks on the side
of the chassis with the holes in the inner rail.
3. Slide the inner rail forward toward the front of the chassis until the rail clicks into the
locked position, which secures the inner rail to the chassis.
4. Secure the inner rail to the chassis with the screws provided.
5. Repeat steps 1 through 4 above for the other inner rail.
Figure 2-2. Installing the Rails
Figure 2-3. Inner Rails Installed on the Chassis
Inner Rails
2
4
3
