A+ Server AS -1023US-TR4 User's Manual
86
Disable DF Sync Flood Propagation
This setting allows you to disable DF Sync Flood propagation. Options include Sync flood
disabled, Sync flood enabled and
Auto
.
Freeze DF Mode Queues on Error
This setting enables Freeze DF Mode Queues on Error. Options include Disabled, En-
abled and
Auto
.
GMI Encryption Control
This setting enables GMI Encryption Control. Options include Disabled, Enabled and
Auto
.
xGMI Encryption Control
This setting enables xGMI Encryption Control. Options include Disabled, Enabled and
Auto
.
CC6 Memory Region Encryption
This setting enables CC6 Memory Region Encryption. Options include Disabled, Enabled
and
Auto
.
Location of Private Memory Regions
This setting controls whether or not the private memory regions (PSP, SMU, and CC6)
are at the top of DRAM or distributed. Note that distributed requires memory on all dies.
Note also that it will always be at the top of DRAM if some dies do not have memory,
regardless of this setting. Options include Distributed, Consolidated and
Auto
.
System Probe Filter
This setting controls whether or not the probe filter is enabled. This setting has no effect
on parts where the probe filter is fuse disabled. Options include Disabled, Enabled and
Auto
.
Memory Interleaving
This setting controls fabric level memory interleaving. Note that the channel, die and
socket have requirements on memory populations and it will be ignored if the memory
doesn't support the selected option. Options include None, Channel, Die, Socket and
Auto
.
Memory Interleaving Size
This setting controls the memory interleaving size. This determines the starting address
of the interleave (bit 8, 9, 10 or 11). Options include 256 Bytes, 512 Bytes, 1 KB, 2 KB
or
Auto
.
Channel Interleaving Hash
This setting controls whether or not the address bits are hashed during channel inter-
leaving mode. This field should not be used unless the interleaving is set to channel and
the interleaving size is 256 or 512 bytes. Options include Disabled, Enabled and
Auto
.
Memory Clear
When this setting is disabled, the BIOS does not implement MemClear after memory
training (only if non-ECC DIMMs are used). Options include Enabled, Disabled and
Auto
.