Supermicro AOC-SLG3-4E2P, Руководство пользователя

Страница: 15 / 18

3-3
Chapter 3: Installation
4. Using the above chart, verify that the cable provided is appropriate for the
expansion card connectors and the backplane connectors. Note that the
MiniSAS HD to OCuLink cables and the OCuLink to MiniSAS HD cables
may physically look the same but are wired differently and may not work if
the wrong cable is used. Verify that the appropriate cable was included. For
example, if your expansion card has OCuLink connectors and is plugging into
a MiniSAS HD backplane, a cable with a green marking at the OCuLink end
must be used.
Figure 3-1. Cable Types
Expansion Card NVMe
Connector (Source)
Backplane
Connector (Target)
SFF-8643 SFF-8643
SFF-8643 OCuLink
OCuLink
SFF-8643
OCuLink
OCuLink
Figure 3-2. Connecting the Cables
5. Connect the cables to the expansion card. The cable latch will click into the
locked position when connected properly.
6. Replace the system cover, plug in the power cord, and power up the system.