Supermicro AOC-SG-i4, Руководство пользователя

Страница: 15 / 38

3-1
Chapter 3
Installing the Drivers
3-1 Updating iSCSI Option ROM Firmware
If you need to update your add-on card’s firmware to use iSCSI option ROM, follow the
procedure below.
Updating iSCSI Option ROM Firmware
1. Download the iSCSI boot image BootIMG.FLB at ftp://ftp.supermicro.com/
CDR-NIC_1.22_for_Add-on_NIC_Cards/Intel/LAN/APPS/BootUtil/
2. Download the DOS flash utility BootUtil.exe at ftp://ftp.supermicro.com/
CDR-NIC_1.22_for_Add-on_NIC_Cards/Intel/LAN/APPS/BootUtil/DOS/
3. Copy both files into a bootable USB key and boot into DOS
4. Run “Bootutil” in DOS to show the available NIC by entering at the DOS prompt:
bootutil -nic=”NIC#” -up=iscsi - file=bootimg.fib
This supposes that the desired NIC number is 1.
5. Now run at the DOS prompt: bootutil - nic=1 -up=iscsi -file=bootimg.fib
6. Reboot your system.
This should update the iSCSI option ROM in your card’s firmware.
3-2 Installing the Drivers in Microsoft Windows
These instructions apply to all versions of Microsoft™ Windows™ 2000, Windows XP
(including Windows XP x64 and Windows XP 64-bit Edition), Windows Vista™
(including Windows Vista x64), and Windows Server™ 2003 (including Windows Server
2003 x64 and Windows Server 2003 64-Bit Edition).
This driver installation updates the drivers for all supported Intel® PRO network
adapters in your system.
Before installing or updating the drivers, insert your adapter(s) in the computer and plug
in the network cable. When Windows discovers the new adapter, it attempts to find an
acceptable Windows driver already installed with the operating system. If found, the
driver is installed without any user intervention. If Windows cannot find the driver, the
Found New Hardware Wizard window is displayed.
Regardless of whether or not Windows finds the driver, it is recommended that you
follow the procedure below to install the driver. Drivers for all Intel adapters supported by
this software release are installed.