Supermicro AOC-ATG-i2S, Руководство пользователя

Страница: 17 / 32

2-6
Super AOC-ATG-i2S(M) Add-on Card User's Guide
2-4 Jumper Settings
Explanation of Jumpers
To modify the operation of the card, jumpers can be used to choose between
optional settings. Jumpers create shorts between two pins to change the function
of the connector. Pin 1 is identified with a square solder pad on the printed circuit
board. See the motherboard layout pages for jumper locations. The Standby Power
default state is Enable (Pins 1-2).
JPAUX1 for
Standby Power
IPMI Support FailOver Support WoL Support
Disable = No
standby power to
AOC NIC Yes, but no
function in S5 Yes, but no function
in S5 No
Enable = Standby
power to AOC NIC Yes Yes Yes
JPAUX1 for
Standby Power
Function Notes
Disable = No
standby power to
AOC NIC Disable jumper to dis -
connect the standby
power
No standby power in standby
mode (S5 state).
Enable = Standby
power to AOC NIC Enable jumper to con -
nect standby power to
AOC NIC
WoL (Wake on LAN) is sup-
ported but limited to plat-
forms with sufficient airflow
when it is in standby mode
(S5 state). Please consult
Supermicro before enabling
it.