Appendix D: UEFI BIOS Recovery
113
9.
When the UEFI Shell prompt appears, type fs# to change the device directory path. Go
to the directory which contains the BIOS package extracted earlier from Step 7. Enter
flash.nsh BIOSname.### at the prompt to start the BIOS update process.
Note:
Do not interrupt this process
until the BIOS flashing is complete.
10. The screen below indicates that the BIOS update process is complete. Unplug the AC
power cable from the power supply, clear the CMOS, and plug the AC power cable in
the power supply again to power on the system.
11.
Press <Del> continuously to enter the BIOS setup utility.
12.
Press <F3> to load the default settings.
13. After loading the default settings, press <F4> to save the settings and exit the BIOS
setup utility.
Содержание A2SDV-4C-LN10PF
Страница 1: ...USER MANUAL Revision 1 0 A2SDV 4C LN8F A2SDV 8C LN8F A2SDV 4C LN10PF A2SDV 8C LN10PF...
Страница 9: ...9 Chapter 1 Introduction Figure 1 1 A2SDV 4C LN8F Motherboard Image...
Страница 10: ...10 A2SDV 4C 8C LN8F LN10PF User s Manual Figure 1 2 A2SDV 4C LN10PF Motherboard Image...
Страница 11: ...11 Chapter 1 Introduction Figure 1 3 A2SDV 8C LN10F Motherboard Image...
