Super X11SAA/A2SAV/-V/-2C-L/-2C-LV/-L/-LV User's Manual
66
USB Configuration
USB3.0 Support
Select Enable for USB 3.0 support. The options are
Enable
and Disable.
XHCI Pre-Boot Driver
Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a pre-boot
drive specified by the user. The options are Enabled and
Disabled
.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are
Enabled
and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and
Enabled
.
SATA Configuration
Chipset SATA
This item enables or disables the onboard SATA controller supported by the SoC. The options
are
Enable
and Disable.
SATA Mode Selection
Use this item to select the mode for the installed SATA drives. The options are
AHCI
and RAID.
Aggressive LPM (Link Power Management) Support
When this item is set to Enabled, the SATA AHCI controller manages the power usage of the
SATA link. The controller will put the link in a low power mode during extended periods of I/O
inactivity, and will return the link to an active state when I/O activity resumes. The options
are
Enabled
and Disabled.
SATA Frozen
Use thia feature to enable the HDD Security Frozen Mode. The options are
Disabled
and
Enabled.
SATA Port 0 ~ 1
Port
Use this feature to enable of disable the specified SATA port. The options are Disabled and
Enabled
.
