manualshive.com logo in svg

Supermicro A2SAP-E, Руководство пользователя, Страница: 83 / 91

Поделиться
Скачать
Supermicro A2SAP-E Скачать руководство пользователя страница 83

Chapter 4: BIOS

83

• 

Boot Option #9

UEFI Application Boot Priorities

This feature allows the user to specify which UEFI devices are boot devices.

• 

Boot Option #1

UEFI USB Key Drive BBS Priorities

This feature allows the user to specify which UEFI USB Key drive devices are boot devices. 
This feature is displayed when a storage device is detected.

• 

UEFI Boot Option #1

• 

UEFI Boot Option #2

UEFI NETWORK Drive BBS Priorities

This feature allows the user to specify which UEFI network drive devices are boot devices.

• 

Boot Option #1

• 

Boot Option #2

Add New Boot Option

Use this feature to select a new boot device to add to the boot priority list. This featured is 
displayed when a storage device is detected.

Add boot option

Use this feature to specify the name for the new boot option.

Path for boot option

Use this feature to set the path to the boot option in the following format: fsx:\path\filename.efi.

Create

Use this feature to create the new boot option.

Delete Boot Option

Use this feature to remove a pre-defined boot device from which the system will boot during 

startup.

• 

Delete Boot Option

Содержание A2SAP-E




























































































Отзывы:

Нет отзывов