manualshive.com logo in svg

Supermicro A+ AS-1113S-WN10RT, Руководство пользователя

Поделиться
Скачать
Supermicro A+ AS-1113S-WN10RT Скачать руководство пользователя страница 37

37

A+ Server AS-1113S-WN10RT User Manual

3.4 Chassis Components

Hard Drives

Your server may or may not have come with hard drives installed. Up to ten 2.5" NVMe 

hard drives are supported by the chassis. Four of the drive carriers may be configured to 

accommodate SATA3 drives with the use of a special cable (CBL-SAST-0813, optional).
The hard drives are mounted in drive carriers to simplify their installation and removal from 
the chassis. (Both procedures may be done without removing power from the system.) 

Removing a Hot-Swap Drive Carrier

1. Push the release button on the carrier.

2. Swing the handle fully out.

3. Grasp the handle and use it to pull the drive carrier out of its bay.

Figure 3-15. Removing a Drive Carrier

Note: 

Enterprise level hard disk drives are recommended for use in Supermicro chassis and 

servers. For information on recommended HDDs, visit the Supermicro website at 

http://www.

supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf

1

3

2

Содержание A+ AS-1113S-WN10RT
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды