Supermicro 7034A-T, Руководство пользователя

Страница: 3 / 104

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperWorkstation 7034A-
T/7034A-i. Installation and maintainance should be performed by experienced
technicians only.
The SuperWorkstation 7034A-T/7034A-i is a high-end, dual processor tower
workstation based on the SC733T-645/SC733i-645 chassis and the X6DAL-TG/
X6DAL-G, a dual processor serverboard that supports single or dual Intel Xeon
TM
processors at a Front Side (System) Bus speed of 800 MHz and up to 12/24 GB
of registered ECC DDR333/266 SDRAM.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the X6DAL-TG/X6DAL-G
serverboard and the SC733T-645/SC733i-645 chassis, which comprise the
SuperWorkstation 7034A-T/7034A-i.
Chapter 2: Server Installation
This chapter describes the steps necessary to set up and check out the configu-
ration of the SuperWorkstation 7034A-T/7034A-i prior to powering up the system.
If your system was ordered without processor and memory components, this
chapter will refer you to the appropriate sections of the manual for their instal-
lation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.