Supermicro 6028R-WTR, Руководство пользователя

Страница: 13 / 124

1-3
Chapter 1: Introduction
Rear I/O Ports
Ports on the I/O backplane includes a VGA port, four USB 2.0 ports, two gigabit
(6028R-WTR) or 10-gigabit (6028R-WTRT) Ethernet ports and one IPMI port. A UID
(Unit Identifi er) button and LED are also located beside the VGA port.
1-3 Server Chassis Features
The SC815TS-R740WBP is an ATX form factor chassis designed to be used in a
2U rackmount confi guration. The following is a general outline of the main features
of the SC815TS-R740WBP server chassis.
System Power
The SC815 features a redundant 740 Watt power supply composed of two separate
power modules. This power redundancy feature allows you to replace a failed power
supply module without shutting down the system.
Note: The power supplies are both redundant, hot-plug.
Hard Drive Subsystem
The SC815 chassis was designed to support eight (8) SATA-3 hot-swap hard
drives. The SuperServer 6028R-WTR(T) system can use 2.5" SATA hot-swap hard
drives or SSD with a conversion kit (P/N" MCP-220-00043-0N).
Front Control Panel
The control panel on the SC815 provides you with system monitoring and control.
LEDs indicate system power, HDD activity, network activity, system information
and power supply failure. A main power button and a system reset button are also
included. As an option, two USB ports may be incorporated into the control panel
to provide front side USB access.
Cooling System
The SC815 chassis has an innovative cooling design that includes three (3) 8-cm
hot-plug system cooling fans located in the middle section of the chassis. The power
supply module also includes a cooling fan.
Note: The fans in this system are redundant, hot-plug.