Supermicro 6028R-E1CR12T, Руководство пользователя

Страница: 11 / 140

1-3
Chapter 1: Introduction
The I/O ports include one COM port, a VGA port, two USB 3.0 ports, two USB 2.0
ports, two 10 Gb TLAN ports and a dedicated IPMI LAN port.
1-3 Server Chassis Features
The SC826BE1C-R920LP is a 2U form factor chassis designed to be used in a
storage configuration. The following is a general outline of the main features of the
SC826BE1C-R920LP chassis.
System Power
The SC826BE1C-R920LP features a redundant, hot-plug 920W power supply com-
posed of two separate power modules. This power redundancy feature allows you
to replace a failed power supply without shutting down the system.
Hard Drive Subsystem
The SC826BE1C-R920LP chassis was designed to support 12 hot-swap SAS or
SATA hard drives. An optional, internal fixed drive mounting bracket (MCP-220-
82611-0N) may be added to support two 2.5" SATA drives.
Front Control Panel
The control panel on the SC826BE1C-R920LP provides you with system monitor-
ing and control. LEDs indicate system power, HDD activity, network activity, system
overheat and power supply failure. A main power button and a system reset button
are also included.
Cooling System
The SC826BE1C-R920LP chassis includes three 8-cm hot-plug system cooling fans
located in the middle section of the chassis. An air shroud channels the airflow from
the system fans to efficiently cool the processor area of the system. Each power
supply module also includes a cooling fan.