Supermicro 1012A-MTF, Руководство пользователя

Страница: 88 / 110

7-6
A+ Server 1012A-MTF USER'S MANUAL
CS Sparing Enable
This setting will reserve a spare memory rank in each node when enabled.
Options are Enabled and
Disabled .
Power Down Enable
This option allows you to
Enable
or Disable DDR power down mode.
Bank Swizzle Mode
This setting Enables or Disables the bank swizzle mode.

ECC Configuration
ECC Mode
This submenu affects the DRAM scrub rate based on its setting. Options
include Disabled,
Basic , Good, Super, Max and User. Selecting User
activates the other options for user setting.
DRAM ECC Enable
This setting allows hardware to report and correct memory errors
automatically, maintaining system integrity. Options are
Enabled or
Disabled. This is option is only active if ECC Mode above is set to User .

Memory Timing Configuration
Memory Timing Config
This option allows you to set the DRAM timing configuration for the system.
Options include Auto or Manual.
Memory Clock Speed
This options is only configurable if Memory Timing Config is set to
Manual. This option sets the memory clock speed to either 200 Mhz ,
266 Mhz, 333 Mhz, 400 Mhz, 533 Mhz, 667 Mhz, 800 Mhz or 933 Mhz.
HT Speed Support
This option allows you to select an HT Link Frequency. Options are H1 and
Auto
.
Note:
A cold reset is required if you change this option.
IOMMU
This setting is used to enable or disable or set the GART size in systems without
AGP. Options include Enabled and
Disabled .