7)
Manual Scan
Press
Arrow button to select “Manual Scan”, and press
Arrow button
to enter manual search menu.
TV will tune from lower frequency to higher frequency when you press
Arrow
button,and from higher frequency to lower frequency when you press
Arrow.
CH:
1
77.25MHZ
Basic operation (to be continued)
4)
SKIP
Press
T
/
S
Arrow button to select “SKIP”, then press
W
/
X
Arrow button to select
“On” or “Off”.
5)
Fine Tune
In case of bad image or sound of TV program, you can use Fine Tune function
to obtain satisfying image or sound with operating steps as follows:
ii) Press
T
/
S
Arrow button to select “Fine Tune” and press
W
/
X
Arrow button to
conduct fine tuning from high frequency to low frequency or from low fre-
quency to high frequency till best picture or sound effect is obtained.
6)
Auto Scan
Press
T
/
S
Arrow button to select “Auto Scan”, then press
W
/
X
Arrow button to
start auto search:
TV will tune automatically and all programs found will be saved. Please don’t
interrupt it.
Note:
i) If you use the TV for the first time, you must use “Auto Scan” to search and
memorize all channels.
ii) If your TV is not in TV input state, you must switch it to TV state at first.
iii) If you want to stop the process of “Auto Scan”, just press MENU button to exit.
AUTO SCAN
CH:
1
77.25MHZ
T
/
S
W
/
X
X
W
MANUAL SCAN
