manualshive.com logo in svg

SuperLogics SL-PPC-154P4T, Руководство пользователя

Поделиться
Скачать
SuperLogics SL-PPC-154P4T Скачать руководство пользователя страница 24

SL-PPC-154P4T

 User’s Manual

16

2.5  Installing System Software

Recent releases of operating systems from major vendors include setup 
programs which load automatically and guide you through hard disk 
preparation and operating system installation. The guidelines below will 
help you determine the steps necessary to install your operating system 
on the panel PC hard drive.

If required, insert your operating system's installation or setup diskette 
into the diskette drive until the release button pops out. (See Fig. 3-1.)
The BIOS of the panel PC supports system boot-up directly from the CD-
ROM drive. You may also insert your system installation CD-ROM into 
the CD-ROM drive. (See Fig. 3-2.) Refer to Chapter 12  if you wish to 
change the BIOS settings.
Power on your panel PC or reset the system by pressing the 
"Ctrl"+"Alt"+"Del" keys simultaneously. The panel PC will automati-
cally load the operating system from the diskette or CD-ROM.
If you are presented with the opening screen of a setup or installation pro-
gram, follow the instructions on screen. The setup program will guide 
you through preparation of your hard drive, and installation of the operat-
ing system.
If you are presented with an operating system command prompt, such as 
A:\>, then you must partition and format your hard drive, and manually 
copy the operating system files to it. Refer to your operating system user's 
manual for instructions on partitioning and formatting a hard drive.

Note:

Some distributors and system integrators may 
have already pre-installed system software prior 
to shipment of your panel PC.

 

Содержание SL-PPC-154P4T







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды