●
Set LED strip length [Pixel number(8~1024)].
*
+
3 number
+ *
for
example
:
*
032
*,
set
pixel
number to 32
.
*
600
*,
set
pixel
number to 600
.
*
1024
*,
set
pixel
number to 1024
.
●
Set LED strip chip type.
*
+
2
number
+ *
*
11
*：
TM1803
*
12
*：
TM1809,TM1804,TM1812,UCS1903,UCS1909,
UCS1912,UCS2903,UCS2909,UCS2912,WS2811,WS2812
*
13
*：
TM1829
*
14
*：
TLS3001,TLS3002
*
15
*：
GW6205
*
16
*：
MBI6120
*
21
*：
LPD6803,LPD1101,D705,UCS6909,UCS6912
*
22
*：
LPD8803,LPD8806
*
23
*：
WS2801,WS2803
*
24
*：
P9813
●
Set LED strip RGB order.
*
+
1
number
+ *
*
1
*：
RGB
, *
2
*：
RBG
, *
3
*：
GRB
, *
4
*：
GBR
, *
5
*：
BRG
, *
6
*：
BGR.
SPI
LED strip setting
Malfunctions analysis & troubleshooting
Causes
Troubleshooting
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match
the remote
r
.
1. Replace battery.
2. Reduce remote distance.
3. re-match the remote
r
.
1. 3-year warranty:
●
The warranty is for free repair or replacement and covers manufacturing faults only.
●
Do not include fees of on site maintenance and consumable parts.
2. Limited Warranty
●
Artificial damage caused by improper use
,
such
as
use inappropriate power supply
,
improper accessories
,
improper installation
,
did not follow the instructions
,
error using
or negligence
.
●
Any damages caused by
force majeure
,
such
as
natural disaster
,
abnormal voltage.
●
The normal use of products caused by aging, wear and tear
,
but it does not affect the
normal use.
Warranty Agreement
1
.
When installing battery, pay attention to the battery positive and negative polarity.
2
.
When remote distance becomes smaller and insensitive, replace the battery.
3
.
A long time without the remote control, remove the battery.
4
.
Gently handle remoter, beware of falling.
5. This product is suitable for cleaning, drying, and suitable temperature.
Malfunctions
No response
from the remote
r
Safety & Warnings
Model: R14
On/Off
: Turn
on/off light
.
Mode
+/-
: Short press switch 45 kinds editable mode
,
9
kinds
colors in turn:
red, yellow, green, cyan, blue, purple, white, 3 color, 6 color.
5 kinds styles in turn:
horse race, scan, chase, meteor, float.
Long press mode+/- 2s, run the first mode (red forward horse race).
Mode
: Short press switch mode build
in
SPI
controller, long press 2s run mode cycle.
Speed
+/-
: Adjust speed, short
press
10
levels, long press 2s the fastest/slowest speed.
Bright
: Adjust brightness, short
press
10
levels, long press 2s get 100% brightness.
If you press back color key firstly, press bright key will adjust background color brightness.
Primary color
: Short press switch 9 kinds color, red, yellow, green, cyan, blue, purple, white, 3 color, 6 color in turn.
3 color is red, green, blue sequence.
6 color is red, yellow, green, cyan, blue, purple sequence.
long press 2s get the red color.
Style
: Short press switch 5 kinds style, horse race, scan, chase, meteor, float in turn,
long press 2s get the horse race style.
Direction
: Short press switch 6 kinds direction, forward, backward, close, split, forward&backward, close&split in turn.
long press 2s get the forward direction.
Back color
: Short press switch 8 kinds background color, black, red, yellow, green, cyan, blue, purple, white in turn.
long press 2s get the black background color.
Digital
num
:
Short press run
10
kinds editable mode directly. long press 2s save.
1
2
3
4
5
No.
6
7
8
9
0
No.
Name
Name
6 color forward chase
Red forward float
Green forward float
Blue forward float
6 color forward meteor
6 color
forward horse race
6 color forward scan
3 color forward meteor
W
hite
forward meteor
6 color forward float
Note: 1. 3 color sequence: red, green, blue. 6 color sequence: red, yellow, green, cyan, blue, purple.
2. Each mode can adjust color, style, direction, background color or speed, and be saved in num key.
3. Short press * key, then long press * key 2s, each num key will restore upper default mode.
DIY loop
: Short
press
run 10 num key mode cycle
.
If
press
*
key
first
,
then
press
multiple any num key, no more than 10, press DIY Loop key lastly,
it will run multiple num key mode cycle.
Function
: Add digital num, used for set IC type, RGB order, pixel length of the LED strip.
On
/
Off
Bright
Speed
+/-
Mode
+
/-
Mode
Primary color
Back color
Direction
DIY Loop
Function
Style
Digital num
