Superior SMC6850 Скачать руководство пользователя страница 4

Position the chair 40cm from the wall to allow for
sufficient space to recline up and down.

Please operate the chair in a flat or level place.

Installing earth wire in correct way.
The plug must be inserted into
socket with earth connect. The
earth connect couldn't be bend
or cut off.

Caution

Please don't use or store the chair in the wet environment like
near the swimming pool, or bathroom.
Keep the chair and remote control dry all the time.
Don't use the chair when your body is wet.

Keep chair away from stove or other warming products.
Don't put the chair under the sun or other high temper-
ature place.

Earth wire is allowed
to near these place

Unplug the power when any damage on the power.

Caution

To avoid sudden falling.

The maximum suggested operating time is 20mins.
5mins for each position beginning with the slight-step
massage. A long continuous massage in the same
position may cause an uncomfortable feeling.

To make sure the back lying.

Before sitting on the chair to avoid injury please inspect
everything to confirm that the massage heads are in the
correct position.

Too long time massage is bad for
your body.

To avoid electric shock when any
leakage or damage.

To avoid accidents or injury

To avoid fade, discolor on
upholstery or hardened,
deteriorated on PU.

To avoid leakage or
electric shock.

To avoid electric shock
or fire harzard.

Unplug the power before cleaning the chair.
Unplug the power after using the chair.

Don't use the chair outside.

Keep the chair away from heat, wet, sharp things and
corrosive, inflammable, explosive environment.
To use electric blanket or other heating products on
the chair is forbidden.

Make sure the plug completely insert into the socket

To reduce short circuits and any

fire hazard.

To avoid the accident when turn
on the power

Turn off all controls before removing plug from outlet.

To avoid accidental injury.

Checking whether any damage on wire no water,
rubbish on wire.

Please turn off the power switch and unplug the power after
massaging.

To avoid accidents

Please make sure that the power switch is at the

OFF

position before inserting the plug into the socket.

Unplug the power immediately when electricity goes off.

To avoid damage or
accidents when power
goes back.

To avoid electric shock.

Make sure to install the earth wire in correct way(Incorrect
install way may cause electric shock. If you don't know how
to install, please find a professional electrician)
Don't use plug adapter (If the enclosed plug doesn't match
with socket, please don't change the plug by yourself and
find a professional electrician to install a matched socket. )

Grounding Instruction

Replace fuse

The chair is equipped with a cord having an grounding conductor.

The plug must be plugged into an appropriate socket that is properly

installed and matched with the plug.

When the fuse is burned out, please turn off the switch and

unplug the power. Opening the lid covered the fuse which is

located in the switch box. Using a same size fuse to replace

the old one, then cover the lid. Or you can find an electrician

to replace the fuse.

Hold the plug to unplug the power but not try to pull the wire
to unplug the power.

Attention for safety

Attention for safety

3

4

P

re

p

ar

at

io

n

P

re

p

ar

at

io

n

Don't press with hands or step on the massage heads
with feet.
Don't put hands between the working massage heads.
Don't put hands or feet in the gap of mechanical parts.
Don't drop or embed anything into the slot of massage
chair.
Don't stand or sit or put anything on the backrest, armrest
or leg-rest.
Don't stand on the chair during operation.
Don't move the chair during operation.
Don't pull out the plug or turn off the power during operation.
Don't put your hands or head between leg-rest when in
reclining position.
Don't use the massage chair while wearing hair curlers.
Don't sit or press on the backrest when the chair is in
reclining position.
Don't massage on exposed skin or with thin clothes. It may
cause skin ache.

Gas pipe: probably cause explosion or fire.
Phone wire and lightning rod: probably cause electric shock
and fire when thundering.
Water pipe: earth wire is useless where there are plastics

Содержание SMC6850















Отзывы: