Superior REX RBH Series Скачать руководство пользователя страница 19

RBH-IOM

www.superiorrex.com

New Fan Coils  – IOM

19

SO TOUGH,

WE GUARANTEE IT.

ELECTRICAL WIRING & CONTROLS

The electrical operation of each unit is determined by the components and 

wiring of the unit and may vary from unit to unit. Consult the wiring diagram 

for the actual type and number of controls provided on each unit. The 

integrity of all electrical connections should be verified at least twice during 

the  first  year  of  operation. Afterwards,  all  controls  should  be  inspected 

regularly for proper operation. Some components may experience erratic 

operation or failure due to age. Wall thermostats may also become clogged 

with dust and lint and should be periodically inspected and cleaned to 

provide reliable operation. 

When replacing any components such as fuses, contactors, or relays, use 

only the exact type, size, and voltage component as furnished from the 

factory. Any deviation without factory authorization could result in personnel 

injury or damage to the unit and will void all factory warranties. All repair 

work should be done in such a manner as to maintain the equipment in 

compliance with governing codes and ordinances or testing agency listings. 

More specific information regarding the use and operating characteristics 

of the standard controls offered by this manufacturer is contained in other 

manuals.

VALVES & PIPING

No formal maintenance is required on the valve package components 

most commonly used with fan coil units other than a visual inspection for 

possible leaks in the course of other normal periodic maintenance. In the 

event that a valve should need replacement, the same precautions taken 

during the initial installation to protect the valve package from excessive 

heat should also be used during replacement. In some cases, the valve 

actuator may fail and usually can be replaced without removing valve 

body from piping.

FILTERS , THROWAWAY

The  type  of  throwaway  filter  most  commonly  used  on  fan  coil  units 

should be replaced on a regular basis. The time interval between each 

replacement should be established based on regular inspection of the 

filter and should be recorded in the log for each unit. Refer to the chart 

below for recommended filter size for each product type and size. If the 

replacement filters are not purchased from the factory, the filters used 

should be the same type and size as that furnished from or recommended 

by the factory. Pleated media or extended surface filters should not be 

used since the high air pressure drops encountered with these types 

of filters is not compatible with the type of fan coil unit covered in this 

manual. Consult the factory for applications using filter types other than 

the factory standard or optional product.

Face Area, Free Area and Filter Sizes

NOTES:

1.  Face and free areas are in square feet [square meters].

2.  Filter sizes are in inches [millimeters].

3.  Free area of Superior Rex Model RBHC and Telescoping Bottom Panel return grilles.

4.  Free area of Superior Rex Model RBHC supply grille and minimum free area allowable 

for a supply grille supplied by others

Unit 

Size

Coil Face 

Area

Model RBHC

Model RBHR

Return Air 

Grille Free 

Area

Supply Air 

Grille Free 

Area

Filter Face 

Area

Nominal Filter Sizes

Filter Face 

Area

Nominal Filter Sizes

20

1.11  [0.1]

0.47 [.04]

0.40 [.04]

1.77 [.16]

30 X 8.5 X 1 

[762 X 216 X 25]

1.18 

[.11]

20 X 8.5 X 1 

[508 X 216 X 25]

25

1.44  [0.13]

0.58 [.05]

0.50 [.05]

2.36 [.22]

(2) 20 X 8.5 X 1 

[508 X 216 X 25]

1.54 

[.14]

26 X 8.5 X 1 

[660 X 216 X 25]

30

1.67  [0.15]

0.68 [.06]

0.56 [.05]

2.36 [.22]

(2) 20 X 8.5 X 1 

[508 X 216 X 25]

1.77 

[.11]

30 X 8.5 X 1 

[762 X 216 X 25]

40

2.22  [0.21]

0.81 [.08]

0.80 [.07]

2.95 [.27]

(1) 20, (1) 30 X 8.5 X 1  

[508, 762 X 216 X 25]

2.36 

[.22]

(2) 20 X 8.5 X 1 

[508 X 216 X 25]

50

2.78  [0.26]

1.01 [.09]

0.96 [.09]

3.54 [.33]

(2) 30 X 8.5 X 1 

[762 X 216 X 25]

2.95 

[.27]

(1) 20, (1) 30 X 8.5 X 1 

 [508, 762 X 216 X 25]

60

3.33  [0.31]

1.15 [.11]

1.20 [.11]

4.13 [.38]

(2) 20, (1) 30 X 8.5 X 1 

[508, 762 X 216 X 25]

3.54 

[.33]

(2) 30 X 8.5 X 1 

[762 X 216 X 25]

Содержание RBH Series



























Отзывы: