Series UAG
Page 16
Nov 11, 2015
Installation
R
EFLECTOR
I
NSTALLATION
•
Slide a reflector section into place within the support hanger, (Figure 12)
Figure 12: Reflector Installation
•
Install reflector support brackets, one at each reflector overlap position, and one in the middle of
each 10' reflector length. Figure 13 shows the installation of the reflector support bracket.
Figure 13: Reflector Support Bracket Installation
Slide Reflector through
the Hanger and Reflector
Support as shown.
Note:
Close all chain links,
"J" bolts and turnbuckles or any
open connection.
1. Place Reflector Bracket
underneath the tube.
2. Hook the Spring Clip with
the Reflector Bracket and rotate
over the tube.
3. Push down the Spring Clip
and slide underneath the
Reflector Bracket.
Reflector Bracket
Spring Clip
Reflector Bracket
Tube
