CDA300 Specifications
Page 6 of 7
32.30
[820.3mm]
7.50
[190.5mm]
7.97
[202.4mm]
2.78
[70.5mm]
5.05
[128.3mm]
M6 x 20 INSERT
4 PLACES
Product Specifications
62Hz - 20,000Hz
Operating Range
116dB Cont. / 122dB Peak
600 Watts @ 8 ohms
5.25” Woofer x6
NL4 and Barrier Strip
32.3” (82cm) H
7.5” (19cm) W
8” (20cm) D
Extruded Aluminum
32lbs (14.5kg) Shipping 36lbs (16.3kg)
Included
Black Powdercoat Aluminum
White Powdercoat Aluminum
Max SPL (calculated) 1 Meter
Recommended Amp Power for Max Output
Transducers - Low Freq.
Input
Dimensions
Enclosure
Weight
Rigging
Finish Options
2
Sensitivity (1W/1M)
91dB
Power Handling
300W (49 Volts) AES/2
4
Nominal Impedance
8 Ohms
Horizontal Coverage Angle -6dB
Vertical Coverage Angle -6dB
90 Degrees
60 Degrees
3
3
Crossover Frequency
Internal Passive Custom 4-way
PRD250 Ribbon x3
High Freq.
1
Optional Accessories
U-bracket
Pole Mount Bracket
Subwoofer Extension Pole
5
1.
LF at -10dB, HF -6dB at 40kHz on-axis however response above
20kHz is limited by air absorption and DSP sampling rates in typical PA
applications.
2.
Full bandwidth pink noise is applied and amplified to a level and
measured at the loudspeaker terminals - corresponding to 1 Watt as
referenced to the loudspeakers nominal impedance. SPL is measured in
an anechoic environment in the loudspeakers far field. Data is
extrapolated to 1 Meters distance from the loudspeaker.
3.
Averaged from 1000Hz to 10kHz
4.
AES established with ambient temperature at 22C in accordance with
AES/2-1984 standard. IEC stated in RMS voltage according to IEC 268-5
5.
Cabinet rated at IEC529-IP35 and Mil Spec 810
