SuperiorFireplaces.US.com
126700-01B
13
Figure 10 - Attaching Firebox to Wall
Studs
Nailing
Flanges
Nails or
Wood
Screws
Figure 12 - Inserting Firebox Into Cabinet
Mantel (Mantel May Vary From Illustration)
Figure 11 - Installing Cabinet Mantel
(Mantel May Vary From Illustration)
Cabinet
Mantel
Gas
Piping
Gas Line
Access Hole
(Either Side
of Firebox)
INSTALLATION
Continued
WARNING: Use only non-
combustible mortar or adhe-
sives when overlapping the front
facing with noncombustible
facing material.
WARNING: A qualifi ed ser-
vice person must install fi rebox.
Follow all local codes.
INSTALLING FIREBOX USING
OPTIONAL CUSTOM BUILT
MANTELS
This fi rebox may be installed using a cabinet
mantel against a wall in your home. The
fi rebox and cabinet mantel can be installed
directly on the fl oor. Mantels may be avail-
able from your retailer or custom built for
your home.
1. Assemble cabinet mantel as instructed.
2. Install gas piping to fi rebox location. See
Gas Line Installation
on
Page 16
. You may
have to cut an access hole in the fl oor or
wall to run gas line to fi rebox. Make sure to
locate access hole so cabinet mantel will
cover it when installed
(see Figure 11).
3. Place
fi rebox on fl oor in desired location.
Make sure mantel will be fl ush against
wall when installed.
4. Carefully slide cabinet mantel over fi re-
box. Be careful not to scratch fi rebox,
cabinet mantel, fl ooring, etc., when install-
ing
(see Figure 12).
5. Install and properly test gas log heater.
Follow installation instructions included
with the vent-free gas log heater that is
being installed.
