ROUND TRAMPOLINE
SET-UP INSTRUCTIONS
ROUND TRAMPOLINE
SET-UP INSTRUCTIONS
Working around the trampoline, attach a
spring on every tenth triangle and stretch
the spring to the corresponding spring slot
on the frame bar.
Add a second spring next to springs that
where attached on Step 4. Repeat this
process until all the springs are attached.
Lay out the safety pad on top of the springs. To
fasten the safety pad, align spring loop (stitched
to underside of pads) with spring. Unhook
spring and pass it through the loop, then
re-hook spring. Remember to hold spring in the
correct position when pulling. Complete by
fastening the velcro around the bar (velcro
stitched to underside of pads).
WARNING: At no time is the trampoline to be used without safety pad
Attach the Safety Plaque with the plastic ties that were included.
MUST BE VERY VISIBLE.
Should you need to disassemble your trampoline, simply repeat
the set-up instructions in reverse order.
ENJOY YOUR SUPER-FUN TRAMPOLINE!
www.trampoline.com
For assistance or general inquiries call us at
1-800-663-2261
4
6
5
NOTE: 16' RD Mega Bounce & XL Big Air Trampolines have extra springs holes after you have completed every tenth spring.
Simply continue around the trampoline hooking up one spring at a time. When you get to the end just hook up the remaining spring.
SupeFun_instructions_8.5x11_FINAL.pdf 2 9/4/15 5:57 PM
