![background image](http://html.mh-extra.com/html/superdry/totech-n2/totech-n2_installation-instructions_1402448004.webp)
N2 Auto Flow instructions
Step 3: Connect one end of the installation cable onto the connector coming out of the N2 system,
the other end of the extension cable plugs into the control box.
Display settings
1. All the functions are set on the control panel.
2. N2 Purging time: Press both DOWN and H/T on the front panel, the setpoint in minutes will flash on
the screen, then press UP or DOWN to change the time. Press SET to confirm the new set value.
Contents
- Auto-Flow control device
- Instruction manual
- Installation cable
Technical data
Power supply:
Direct from power supply cabinet
N² Connection:
6mm hose connection
N² Pressure:
1 – 6 bar
N² Standby- amount:
0 – 25 L/min
N² Purge:
0 – 25 L/min
CE- Declaration