3
SECTION 1 - SETUP
ROBOT POWER SWITCH
FLYSKY POWER SWITCH
Your robot may come in a crate or carry case. As you unpack your robot, take note of how everything fits so you may safely store
your system for future use.
1.
Check that all your ordered items are included in the package.
2.
Place the robot on a level surface or on blocks so that the tracks/wheels can rotate freely.
3.
Turn on your FLYSKY controller. To do this, flip the power switch at the bottom right of the controller.
4.
The robot has a power switch on the rear of the chassis. Turn on the robot by closing the yellow switch. Turn off by pressing the
yellow button on top of the switch. Do not leave the robot on indefinitely as a dead battery can potentially cause damage.
5.
Before placing the robot on the ground, read through the Operations section and test the controls to make sure the robot moves
as anticipated.
WARNING
- Do not move joysticks while the controller is binding. This can cause unintended movements and lead to injury or
damage to the robot and its surroundings.
WAIT AT LEAST 3 SECONDS
.
LEFT JOYSTICK -
Controls the mower. Push
UP
to turn on mower blades.
RIGHT JOYSTICK -
Robot Drive: This joystick is used to drive the robot forwards/
backwards and turn left/right.
NOTE
Never charge batteries unattended. Regularly charge batteries to prevent levels from dropping below point of recovery.
https://www.superdroidrobots.com/shop/custom.aspx/battery-terms/61/
NOTE
Set all switches to the UP position, and the left joystick to the DOWN position.
Charging the Robot
Operation
Unpacking and Activation
