MLT-JR Tracked Robot Platform
SuperDroid Robots, Inc
Contact
224 Technology Park Lane
(919) 557-9162
Fuquay Varina, NC 27526
Revised: May 22, 2018
Page 7 of 13
4.
Mount the idler wheel assembly approximately in the center of the slot in the chassis (this may need to be
adjusted when you put the tracks on). The serrated nut should press against the outside of the chassis and
a second serrated nut should be tightened against the inside of the chassis. After tightening the nut, make
sure the wheel still spins freely and adjust if necessary.
