HK1000-DM4-E, 4WD All Terrain Enclosed Robot Platform
SuperDroid Robots, Inc
Contact
224 Technology Park Lane
(919) 557-9162
Fuquay Varina, NC 27526
Revised: June 20, 2019
Page 3 of 4
Robot Operation
1.
Turn on the robot by locating the power switch on the back right hand side of the robot and flipping
the switch to the on position.
2.
Turn on the remote and wait for the “Rx” icon in the top right corner of the screen to appear.
NOTE: Driving the robot be
fore the “Rx” icon has appeared will confuse the robot and make
it think that the position of the stick is the zero point of the robot and it will continuously
move in that direction until powered off and on again.
3.
Use the right thumbstick on the remote to control the robot.
4.
When done using the robot, first turn off the controller, and then turn off the robot using the switch
on the side of the robot.
Charging
The charging ports for the robot are located on the front right side of the robot (Same side as the
power switch). Charge using the two provided battery chargers.
Never Charge Batteries Unattended
