Page 9 of 24
Form 0164D 2825 07/17/08
Superchips Inc.
Superchips Inc.
1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
6. Quick Start – Program my vehicle with
User Options
NOW!!!
Please follow the steps below to program your vehicle
From the opening screen – Step 1
*** Press NEXT to scroll as needed ***
1) Press ENTER – selects Performance Tuning
2) Press ENTER – selects Read Vehicle
3) Press ENTER – selects Read Stock
4)
Follow ON SCREEN – Turn Vehicle Ignition Switch to Run (On)
(DO NOT START VEHICLE!!)
Most 1999-2008
Push button
2005-2006 Corvette
1) Press OK when the ignition on, Reading will start
2) Press OK when prompted Stock Files are Saved
3) Press EXIT – returns you to Previous Screen
(Please see next page)
Press to Start
Press for Accessory,
Run (on),
Press to turn Off
Page 10 of 24
Form 0164D 2825 07/17/08
Superchips Inc.
Superchips Inc.
1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
From the Previous Screen – Step 2
*** Press NEXT to scroll as needed ***
*** Press Plus/Minus to adjust settings ***
1) Press ENTER – selects Change Setup
2) Press ENTER – selects Power Level
3) Press SAVE – selects the highlighted tuning level
4) Press YES – selects Adjust User Options
5) Press SAVE – after selection of Axle (Gear) Ratio
6) Press SAVE – after selection of Full Throttle Shift Point 1-2
7) Press SAVE – after selection of Full Throttle Shift Point 2-3
8) Press SAVE – after selection of Full Throttle Shift Point 3-4
9) Press SAVE – after selection of Shift Pressure 1-2
10) Press SAVE – after selection of Shift Pressure 2-3
11) Press SAVE – after selection of Shift Pressure 3-4
12) Press SAVE – after selection of Radiator Cooling Fan
13) Press SAVE – after selection of Engine Rev Limiter
14) Press SAVE – after selection of Vehicle Speed Limiter
15) Press SAVE – after selection of 1-4 skip shift (CAGS)
16) Press YES – for ‘Are you done with user options? ‘
From the Previous Screen – Step 3
1) Press ENTER – selects Program Vehicle
2) Press YES – Program with selected file
3) Press YES – Final confirmation: Install selected file
(DO NOT START VEHICLE!!)
4) Press OK after turning Ignition Off & Removing Key
Upon completion, remove cable from vehicle, as instructed on screen
Your vehicle is now programmed with Superchips and user options!
You may now start your vehicle.
