Installation Instructions
LED Low Voltage Path Lights
Important: Read all instructions prior to installation.
Rev Date: V2.2 04/12/2019
SBL Part No. Description
*WWN-2212 Silicone Filled Wire nut
SFT-20
Self Fusing Silicone Tape
WP14-2DB
14 Guage Landscape Wire
WP12-2DB
12 Guage Landscape Wire
Safety and Notes
Parts Included
Recommended Accessories
Assembly
1 - Low Voltage Path Light
1 - Mounting Stake
*Note: Cutting quick connects will not void warranty.
Product exchange only.
1.
Lay fixtures out as they will be installed.
2. Run landscape wire (WP14-2DB or WP12-2DB available at
superbrightleds.com) from 12V supply past each light. Wire must be
within 8” of mounting stake to allow power connections to be made.
3.
Use quick connects supplied with each fixture to connect each light
to the landscape wire.
4.
Using a small shovel and/or water, loosen the ground where fixture will be
installed. Press stake into ground.
Note: Do not use a hammer or exert excessive force on the fixture while
installing as this may cause damage.
Note: DO NOT force stake using fixture as grip. Push from stake only.
5.
Turn on 12V supply and ensure all fixtures are working. If one or more individual
fixtures are not working, check each connection to landscape wire. If none
come on, check connection to the 12V supply. It is recommended to wrap all
connections in
electrical or self-fusing tape (available at superbrightleds.com).
6.
Bury landscape wire, fixture pigtails, and connectors. A depth of 3” is
recommended. Wires and connectors can also be covered by mulch or stone.
Low Voltage
Landscape Wire
Quick Connects
Slot
Power
Supply
Assemble fixtures as shown below. Run
power wires through slot in stakes.
PLTT-x1BK
PLOS-x1BR
PLMB-x1BK
PLOS-x3CU
PLTT-x1BK, PLOS-x1BR
PLMB-x1BK, PLOS-x3CU
PLP-x25
PLP-x25
User Manual
• For use with outdoor, low-voltage landscape lighting systems only.
• Do not submerge in water—not for use with submersible or pool/spa equipment.
•
Light fixture is only compatible with 12-Volt AC or DC power supply. Do not exceed 80% of power supply max output.
•
Use appropriate landscape wire. (SBL product numbers WP14-2DB or WP12-2DB)
