LED Low Voltage Path Lights
Important: Read all instructions prior to installation.
User Manual
LED Low Voltage Path Lights
User Manual
Rev Date: V2.2 04/12/2019
Rev Date: V2.2 04/12/2019
Trouble Shooting
PLTT-x1BK, PLOS-x1BR
PLMB-x1BK, PLOS-x3CU
PLP-x25
Problem
Possible Cause
Solution
Fixture does
not light
1. There is no power to 12V power
supply.
2. The quick connector does not
make contact with wires.
3. The primary landscape wire is not
connected to 12V power supply.
4. There is a disconnection in prima-
ry landscape wire.
5. Minimum load not exceeded.
1. Check the outlet to 12V power supply and ensure that a breaker or GFCI
circuit has not been tripped.
2. Check the wiring of quick connector that it is screwed tightly, piercing
through wire insulation to make solid contact with wire conductors.
3. Check primary landscape wire connection to 12V power supply.
4. Follow wires from fixture to 12V power supply to ensure a continuous run
and/or follow wires between problematic fixture and working fixture.
5. Ensure that your power supply does not have a minimum load requirement.
Consult the power supply specifications or manual.
Light flickers
(one fixture)
1. There is a loose connection with
quick connect on primary land-
scape wire.
1. Tighten quick connects, and ensure contacts are piercing through wire
insulation to make solid contact with wire conductors.
Light flickers
(all fixtures)
1. There is a loose connection to 12V
power supply.
2. Minimum load not exceeded.
1. Disconnect power to 12V power supply and ensure primary landscape wire
connections are securely fastened and not in contact with other wire.
2. Ensure that your power supply does not have a minimum load requirement.
Consult the power supply specifications or manual.
Light is dim
1. Maximum load of 12V power
supply has been exceeded.
2. Recommended distance per land-
scape wire guage exceeded.
1. Check for other lights or other load on same system and/or increase 12V
power supply wattage.
2. Increase primary landscape wire gauge size to recommended guidelines.
* For superbrightleds.com technical help call 866-590-3533
Power Supply
Wattage @ 12 VAC
Max Fixtures
PLTT-x1BK
PLOS-x1BR
PLMB-x1BK
PLOS-x3CU
PLP-x25
20 W
8
12
8
3
10
50 W
22
32
22
8
25
100 W
44
64
44
17
50
200 W
88
128
88
35
100
Power Load Guide
* For superbrightleds.com technical help call 866-590-3533 or use our online chat service.
