MiBoxer 2.4 GHz Wi-Fi Multi Zone RGBW
Controller and Remote
Important: Read all instructions prior to installation.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V2.1 03/03/2020
User Manual
LDRF-RGB-MZ
Controller: RGB-MZ
Remote: MZ-RGB-REMOTE
DO NOT connect controller or LEDs directly to 120V AC power. This controller requires a 12V or 24V DC power supply.
DO NOT exceed max load of 18 Amps, overloading the controller may cause overheating, shorting, and possibly failure of controller.
Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the systems components.
DO NOT expose the controller or remote strip to direct or indirect moisture.
Always observe proper polarity when connecting power and load.
Mode 7 cycles through modes 1-9 starting with 8
Mode
Function
Brightness Speed Controls
Description
1
RBGW Fade In/Out
Adjustable
Not adjustable
Red, green, blue and white fade in/out in a set cycle.
2
Seven Color Flash
Adjustable
Adjustable
Red, green, blue, yellow, magenta, cyan, and white
3
Disco
Adjustable
Adjustable
Red, green, blue, white, purple, and yellow cylce in rotation with
random transitions
4
Red Fade In and Flash
Adjustable
Adjustable
Red brightens to full brightness, then flashes 3 times
5
Green Fade In and Flash
Adjustable
Adjustable
Green brightens to full brightness, then flashes 3 times
6
Blue Fade In and Flash
Adjustable
Adjustable
Blue brightens to full brightness, then flashes 3 times
7
*Color Fade In/Out and Flash
Adjustable
Adjustable
Multiple colors fade in/out and then flash randomly
8
Six Color Fade
Adjustable
Adjustable
Red, green, blue, yellow, magenta, and cyan fade in/out
9
White Fade In/Out
Adjustable
Adjustable
White flashes continuously
*
Touch Control
RGB
B
Power
(wired)
Power
(CPS)
G
R
V+
-
+
CPS Power Supply (optional)
(Match voltage to LED voltage)
To Power Supply
RGB LED Flexible Light Strip
(Match voltage to LED voltage)
+-
+
R
B
G
+
R
B
G
+
R
B
G
+
R
B
G
+
R
B
G
FCC Statement
Wiring
Modes List
Safety
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications in construction
of this device which are not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
Note: CPS terminal and screw terminals should not be used at the same time.
Type
3 Channel
Input Voltage
12~24 VDC
Output
6 Amps / Ch
Total Output
18 Amps
Max Wattage
216W (12V) / 432W (24V)
Operating Temp
-25°C ~ 60°C
Controller Size
L3.3in x W1.7in x D.9in (86 x 45 x 23mm)
Controller Weight
55g (1.94oz)
Frequency
2.4GHz
FCC ID
2AFRVFC24GRMT4
Batteries
2 x AAA
Specifications
