MiBoxer 2.4 GHz Wi-Fi Multi Zone RGBW
Controller and Remote
Important: Read all instructions prior to installation.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V2.1 03/03/2020
User Manual
LDRF-RGBW6-MZ
Controller: RGBW6-MZ
Remote: MZ-RGB-REMOTE
Do not connect controller directly to AC power. This controller requires 12–24 VDC power supply.
Do not exceed max load as listed in spec table. Overloading the controller will cause overheating and possible failure of controller.
Ensure the power supply is not plugged into an outlet before connecting or disconnecting any of the systems components.
Do not expose the controller or remote to direct or indirect moisture.
Always observe proper polarity when connecting wiring.
*Note: Max ouput will be limited to 6 A total (with up to 6 A per channel
when used in single color mode) when using DC barrel input power.
Modes List
Safety
+
R
B
G
+
R
B
G
+
R
B
G
+
R
B
G
+
R
B
G
W
B
Power
(wired)
Power
(CPS)
G
R
V+
-
+
CPS Power Supply
(Match voltage to LED voltage)
To Power Supply
(Match voltage to LED voltage)
+-
RGB LED Flexible Light Strip
Single Color LED Flexible Light Strip
To Power Supply
(Match voltage to LED voltage)
+-
W
B
Power
(wired)
Power
(CPS)
G
R
V+
-
+
RGBW LED Flexible Light Strip
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
Touch Control
RGBW
Touch Control
RGBW
CPS Power Supply
(Match voltage to LED voltage)
+
R
B
G
+
R
B
G
+
R
B
G
+
R
B
G
+
R
B
G
W
B
Power
(wired)
Power
(CPS)
G
R
V+
-
+
CPS Power Supply
(Match voltage to LED voltage)
To Power Supply
(Match voltage to LED voltage)
+-
RGB LED Flexible Light Strip
Single Color LED Flexible Light Strip
To Power Supply
(Match voltage to LED voltage)
+-
W
B
Power
(wired)
Power
(CPS)
G
R
V+
-
+
RGBW LED Flexible Light Strip
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
+
R
B
G
w
Touch Control
RGBW
Touch Control
RGBW
CPS Power Supply
(Match voltage to LED voltage)
FCC Statement
Wiring: Method 2
Wiring: Method 1
Specifications
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications in construction
of this device which are not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
Type
RGB+W
Input Voltage
12–24 VDC
Output Current
10 A total, with up to 6 A per channel when
used in single color mode*
Operating Temperature
-13°–140° F (-25°–60° C)
Wi-Fi Frequency
2.4 GHz
FCC ID
2AFRVFC24GRMT4
Remote Batteries
2 x AAA
Mode
Function
Description
1
Six Color Fade In/Out
Red, Yellow,Green, Cyan, Blue and Purple fade in and out in a continuous repeating cycle.
2
White Fade In/Out
White fades in and out continously
3
RGBW Fade In/Out
Red, Green, Blue and White fade in and out in a continuous repeating cycle.
4
Seven Color Flash
Red, Green, Blue, Yellow, Purple, Cyan and White cycle in set pattern with flashing transitions.
5
Disco Random Pattern
Red, Green, Blue, Yellow, Purple, Cyan and White cycle at random with flashing transitions.
6
Red Fade In/Out with 3 Flashes
Red increases to full brightness then flashes 3 times.
7
Green Fade In/Out with 3 Flashes
Green increases to full brightness then flashes 3 times.
8
Blue Fade In/Out with 3 Flashes
Blue increases to full brightness then flashes 3 times.
9
All Pattern Mode
All 8 patterns above cycle through and repeat.
