Optional WiFi-CON2 Setup
Optional Remote Control Setup
Begin by downloading the MiBoxer app on a compatible device (iOS or Android). See WIFI-CON manual
for complete instructions on how to establish connection with a phone or tablet.
Note: A constant 2.4 GHz Wi-Fi connection to both your device and the WIFI-CON2 is required for remote access.
Linking a Light
1. Press the Link/Unlink button in app.
2. Select the desired zone.
3. Follow the on screen instructions to link the light.
Activating and Controlling a Specific Zone
To activate a specific zone, select one of the available zones and press On button. Zone is now active and
remote commands will only affect lights linked to that zone until returned to master mode.
Unlinking a Light
Make certain the light is powered off before beginning.
4. Press the Link/Unlink button in app.
5. Select the desired zone.
6. Press the unlink button to remove all lights from the selected zone.
Begin by installing two AAA batteries (not included) into wireless remote.
Note: Wireless remote operates using 2.4 GHz RF frequency and has a 98.4 ft. (30 m) range.
Linking a Light
1. Make certain light is powered off.
2. Apply power to light. Within 3 seconds, press and hold one of the Zone On (|) buttons until
light begins flashing. Light will flash 3 times if successfully linked to selected zone.
Activating and Controlling a Specific Zone
To activate a specific zone, press Zone On (|) button for desired zone. Zone is now active
and remote commands will only affect lights linked to that zone until returned to master mode.
Unlinking a Light
1. Make certain light is powered off.
2.
RGBCCT-MZ8-RF
—Apply power and within 3 seconds, press Zone On (|)
or Master On (|) button five times quickly.
Note: With either remote, light will flash 10 times if successfully unlinked.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V4 01/27/2021
Preset Modes
Mode
Description
7 color fade in/out
seven colors fade into each other in sequence
white scroll
scrolls from warm white to cool white then back to warm
flash
flashes through 6 colors then full 2700K white and 6500K white
fade
fades in and out of red, green, blue, warm white, and cool white
disco
different colors flash randomly
red light SOS mode
red light brightens from 0–100%, then flashes off and on 3 times (repeats in sequence)
green light SOS mode
green light brightens from 0–100%, then flashes off and on 3 times (repeats in sequence)
blue light SOS mode
blue light brightens from 0–100%, then flashes off and on 3 times (repeats in sequence)
all in one
cycles through all other programs
User Manual
WIFI-CON
Important: Read all instructions prior to installation.
FL-RGBCCT Series
RF Controlled RGBCCT LED Flood Light
