User Manual
WIFI-CON
Important: Read all instructions prior to installation.
FL-RGBCCT Series
Optional Compatible Remotes and Controller
• Do not use with wall dimmers, relays, or any other controls other than those listed.
• Avoid looking directly into the lamp when illuminated.
•
Ensure all mounts are securely attached and will support the weight of the fixture. Failure to properly support
fixture may result in damage or injury, for which the manufacturer does not assume responsibility.
•
Supplied cable on 100–240 VAC models utilizes 5-15P plug compatible with standard 120 VAC outlet only.
•
Lights can display an RGB color or a white CCT value, but cannot do both simultaneously.
1 - Master On/Off
Acts as a master ON (–) / OFF (O) control for all paired lights. If a single zone
is currently active, pressing the master ON (–) button on remote or back button
in app restores master function.
2 - Color Selection Ring
Directly selects color along a circular spectrum. For white light, press W button
in app or Zone On (|) button on remote until light changes to a steady bright white.
3 - Selection LED Indicator
Flashes once to indicate when a command has been selected.
4 - Brightness Touch Slider - Increase/Decrease
Increases (right side) or decreases (left side) the brightness level. Changing
active mode resets brightness level to full.
5 - Mode
Preset modes feature different color combinations, light transitions, and patterns.
On wireless remote, this button initiates mode function and scrolls through modes
in ascending order. In app, simply select mode button and press any numbered
mode button to switch between modes.
RF Controlled RGBCCT LED Flood Light
One of these controls (available at additional cost) is required to operate the light. Each light
can be linked with up to four different controls (any combination of wireless remotes and Wi-Fi
controls). Each control (and zone) can be linked to an unlimited number of lights.
Safety and Notes
Specifications
Operating Temperature Range
-4°–140° F (-20°–60° C)
IP Rating
IP65
Maximum Receiving Range
98.4 ft (30 m)
RF Operating Frequency
2.4 GHz
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
FL-RGBCCT-60W-120V
Rev Date: V4 01/27/2021
RGBCCT-MZ8-RF
(for use with RGBCCT models)
1
1
2
4
8
5
6
6
7
7
9
3
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
6 - Mode Speed Increase/Decrease
Increases (S+ or +Speed) or decreases (S- or -Speed) speed of currently
active mode.
7 - Zone On/Off
Allows zones (channels) of RGBW lights to be separately linked and controlled
by remote / app. Pressing one of the Zone On (|) buttons activates that zone.
Commands will affect only lights in that zone. Once linked to a zone, lights
remain linked until they are unlinked.
8 - Saturation Touch Slider - Increase/Decrease
Cools (right side) or warms (left side) CCT value.
9 - White LED Selection
Switches to white LED operation.
WIFI-CON2
(for smart phone / tablet control,
for use with all models)
Note: Functions are similar, but
the phone/tablet display will vary
in appearance from remote.
