Important: Read all instructions prior to installation.
Parts Included
Parts
Linking Lights to App Remote
Setup Instructions
1. Download Mi-Light 3.0 app on compatible device (iOS or Android).
2. See WIFI-CON manual for complete instructions on how to establish connection
and set up Wi-Fi control.
Note: Constant Wi-Fi connection is required for remote access to Wi-Fi control
through your device.
Wi-Fi Control
Wireless Remote Control
1 - WIFI-CON
1 - USB-500MA-5V
1 - MZ-RGB-REMOTE or RGBCCT-MZ8-RF
Linking Lights to Remote Control
Setup Instructions
Install two AAA batteries (not included) into wireless remote.
Note: Wireless remote operates using radio frequency and has 100 ft. (30 m) range.
User Manual
Part Number:
FL-RGB Series
1A
1C
1B
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications in construction
of this device which are not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Linking a Light
1. Make certain light is powered off.
2. Apply power. Within 3 seconds, press and hold one of the Zone On (|)
buttons until light begins flashing. Light will flash 3 times if successfully
linked to selected zone.
Activating and Controlling a Specific Zone
To activate a specific zone, press Zone On (|) button for desired zone. Zone
is now active and remote commands will only affect lights linked to that zone.
Unlinking a Light
1. Make certain light is powered off.
2.
MZ-RGB-REMOTE
—Apply power. Within 3 seconds, press and hold
Zone On (|) or Master On (|) button until light begins flashing.
RGBCCT-MZ8-RF
—Apply power. Within 3 seconds, press Zone On (|)
or Master On (|) button five times quickly.
Note: With either remote, light will flash 10 times if successfully unlinked.
Linking a Light
1. Press control configuration select button in top, right corner. (1A)
2. Select the remote pictured (MZ-RGB-REMOTE). (1B)
Note: Remote RGBCCT-MZ8-RF can also be selected if desired.
3. Make certain light is powered off and select desired zone in app.
4. Select linking icon in top right. (1C)
5. Apply power and press link button within 3 seconds. Light will flash 3 times
if successfully linked.
Activating and Controlling a Specific Zone
To activate a specific zone, select one of the zones and press On (|) button.
Zone is now active and remote commands will only affect lights linked to that zone.
Unlinking a Light
Make certain the light is powered off and select the desired zone in app.
6. Select linking icon in top right. (1C)
7.
Apply power and press unlink button within 3 seconds. Light will flash 10 times
if successfully unlinked. Unlinking a light from one remote will unlink it from all
other remotes it is linked to as well.
Rev Date: V1.2 04/08/2019
Mi-Light 3.0 app on iOS
1
¹12 VDC models are not FCC certified
