Installation Instructions
Rev Date: V1 11/22/2016
Safety and Notes
Included Parts
Installation
• Read all of these instructions thoroughly before use. Keep this
instruction manual in a safe place for future reference.
•
This lighting fixture is only suitable for a 12V AC or DC power supply.
Note: If Running power wire on surface skip step 1. Bend power wire
down and proceed to step 2.
1. Drill 1/4” hole where light is to be mounted. Feed power wire
1 - LED Eyelid Step/Deck Light
3 - M4 x 8mm screws with “O” ring
3 - M4 x 25mm screws with “O” ring
3 - Plastic Anchor
Weatherproof LED Eyelid Light
Important: Read all instructions prior to installation.
User Manual
Part Number:
ELL-NW3W
ELL-WW3W
3.
Install front cover on base with lens pointing down. Ensure screw
holes are aligned, and secure cover to base using M4 x 8mm screws
with “O” rings (Fig. 2).
through hole.
2.
Position light base ensuring LEDs
are pointing down and reflector
plate is level. Secure light base
to mounting surface using M4 x
25mm screws with “O” rings and
anchors if required (Fig. 1).
Reflector
Plate
Base
FIGURE 1
FIGURE 2
Lens
Front
Cover
