Installation Instructions
1. Carefully remove mounting panel by using
a flat-head screwdriver to release tabs in two
upper slots (FIG 1).
2. Remove appropriate knockouts for wiring
and mounting from real panel (FIG 2).
3. Run wiring through mounting plate and
connect wiring to junction box. Cap unused
wire. (refer to wiring diagram)
Note: Orange and black wires should
never be connected at the same time.
4. Securely attach mounting panel to wall
or junction box with included hardware.
5. Connect battery and ensure battery
and circuit board are properly
positioned (FIG 3).
6. Reattach light assembly to mounting
panel (FIG 3).
7. Apply power and allow battery pack
to charge for at least 24 hours
before initial use/test.
8. After 24-hour period, press test
button to make certain lights are
functioning as intended and are
aimed correctly.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
LED Emergency Light
EL-RW
Battery Connection
Battery
Battery Connection
Battery
(FIG 1)
(FIG 2)
(FIG 3)
User Manual
¹
¹Limited 2-year warranty on battery.
Rev Date: V2 04/09/2020
Important: Read all instructions prior to installation. SAVE THESE INSTRUCTIONS.
