Superabrasive LAVINA V16E, Руководство пользователя

Страница: 11 / 28

Superabrasive Owner’s manual original language – Lavina
®
V16E 01/2021
11
5.6 BEFORE YOU BEGIN
• The working area must be clear from any debris or objects.
• A first-time operator must always read the manual and heed all safety instructions.
• Perform general daily inspections of the vacuum and inspect the vacuum before each use for
any sign of damage.
• Inspect all safety devices.
• The vacuum/filters must be clean and the hose should be connected.
5.7 OPERATING THE VACUUM
When operating the LAVINA® V16Е, be sure that no one else is within close proximity to the vacuum.
Never leave the vacuum unattended while working. The hose must move freely, be damage-free, and
should never run beneath the vacuum or machine. Check the floor prior to beginning any work, and
ensure that it’s not too uneven, which can cause damage to the vacuum.
5.8 AFTER WORK IS COMPLETED
When work is complete, clean the vacuum and its surroundings sufficiently, empty all dust / debris,
secure the hose, and store the vacuum in a safe and secure place.
5.9 THE WORK AREA
Ensure that the area is free of unauthorized people or vehicles, hoses, and always check the floor for
debris.
5.10 PERSONAL PROTECTIVE EQUIPMENT (PPE)
When operating the machine, always wear safety shoes, ear protectors, safety gloves (especially
when changing tools), and suitable clothing. All persons within the immediate working area must wear
safety glasses with side shields.
5.11 OPERATOR
The operator must be aware of the vacuum’s work environment, be properly trained prior to
operating the equipment, and fully understand this manual. Only one operator may work with the
machine at a single time. The operator must understand and interpret all the drawings and designs in
manual, understand all sanitation and safety regulations pertaining to its operation, have floor grinding
experience, know how to perform in an emergency situation, and have an adequate technical
knowledge.
• The dust collector should only be operated in environments with a temperature between 41°F
and 113°F (5°C to 45°C) and a maximum relative humidity of 70%.
• The work environment for the vacuum should be clean, well-lit, and free of combustible
elements.
• The dust collector should not be operated without the proper filters installed. This could
possibly result in damage to the machine, and cause harm to surrounding personnel.
• Do not open the waste container or motor head assembly while the vacuum is operating.
• Do not vacuum any flammable materials or substances such as fuels, solvents, etc. A dust
collector must be specifically designed and labeled for such operation. When grinding epoxy,
first ensure that the epoxy is non-toxic.
• Do not vacuum any corrosive substances unless the vacuum is specifically outfitted with
containers suitable for this purpose.
• Do not vacuum any burning, smoldering, or hot materials. This could result in a possible
explosion and/or damage to the vacuum components.