©SUPERA
V.1.0 | August 2014
INS
TRUCTION
MANU
AL
JAMMING
When the circuit breaker automatically stops the motor, or when the motor continues
to function but no meat comes out of cutting plate, bone or other materials may be
jamming the unit. Perform the following steps:
1. Switch unit off .
2. Press circuit breaker to reset.
3. Turn switch to reverse to clear jamming of bone or other materials.
4. Reverse operation will continue for as long as reverse is held down.
TROUBLESHOOTING
If the minced meat is not discharged smoothly or appears to be in the form of paste,
see the following:
PROBLEM:
Screw cap is tightened too much thus cutting blade does not contact
properly with the cutting plate
SOLUTION:
Re-adjust it
PROBLEM:
The cutting plate is blocked
SOLUTION:
Clean it
PROBLEM:
Cutting blade is dull
SOLUTION:
Grind or replace it
