![background image](http://html1.mh-extra.com/html/supera/cyt-120-1/cyt-120-1_instruction-manual_1402099003.webp)
©SUPERA
V.1.0 | August 2014
INS
TRUCTION
MANU
AL
Wiring Diagram for the Conveyor Toaster
CLEANING – NOTE:
To maintain cleanliness and increase service life, the oven should
be cleaned daily. Do not immerse the unit in water or any other liquid. If liquid enters
the electrical compartment it may cause a short circuit or electrical shock.
• Disconnect the power cord from the electrical outlet and allow unit to cool down
• To clean the exterior, wipe down with a damp cloth
• Make sure the toaster surface is completely dry before attempting to use again
• To clean the crumb tray, carefully slide the crumb tray out and dispose of any
crumbs
• To clean the toast feed ramp, press in the two wire spokes and remove the guide
from the unit
• Wipe clean with a soft, damp cloth and re-install by aligning wire spokes with holes
in toaster
• To avoid damage, do not use abrasive cleaners or scouring pads
• If soap or chemical cleaners are used, be sure they are completely rinsed away with
clear water immediately after cleaning. Chemical residue could damage or corrode
the surfaces of the unit.