Super X10SBA Скачать руководство пользователя страница 88

Страница: 88 / 99

4-28

X10SBA/X10SBA-L User’s Manual

Save As User Defaults

To set this feature, select Save as User Defaults from the Exit menu and press <En-
ter>. This enables the user to save any changes to the BIOS setup for future use.

Restore User Defaults

To set this feature, select Restore User Defaults from the Exit menu and press <En-

ter>. Use this feature to retrieve user-defined settings that were saved previously.

Boot Override

This feature allows the user to override the Boot Option Priorities sequence in the

Boot menu, and immediately boot the system with another device specified by the

user. This is a one-time override.

UEFI: Built-in EFI Shell

IBA GE Slot 0200 v1404

Launch EFI Shell from filesystem device

Select this item and press <Enter> launch EFI Shell for your computer.

Reset System with ME Disable Mode

Select this item and press <Enter> to reset your system when your system is in
Manufacture (ME) Disabled mode.

Содержание X10SBA




































































































Результаты поиска

Содержание X10SBA

Отзывы:

Super X10SBA, Руководство пользователя, Страница: 88 / 99

Результаты поиска

Содержание X10SBA

Отзывы: