Super X HCXT, Руководство для наездников, Страница: 21 / 38

17 Pre-Operation Check
Tread Depth
Raised areas at the base of the tread, known
as wear bars, act as easily-visible tread depth
indicators. When the road contact surface has
worn to the top of the wear bars, replace the
tire.
If you have installed tires that do not have
wear bars, use an accurate ruler or depth
gauge to measure the shallowest tire tread you
can find (usually near the center of the tire
surface). Replace a tire with a tread depth less
than 1/16” (see your
Super X Service
Handbook or an authorized Excelsior-
Henderson Dealer).
Electrical Equipment
Driving Lamps
Set the main switch and the driving lamp switch to the On position. Both of the
driving lamps should illuminate. Set the driving lamp switch to the Off position.
Both of the driving lamps should turn off.
1. Wear bar
10060