1
STEP
2
STEP
5
STEP
4
Continue this process around the
trampoline frame until the net is fully
fitted to the steel triangles on the bed.
If you twist the net during this
stage by fitting the incorrect slot
to the steel triangle, it will
continue to twist as you work
your way around the frame and
will not line up properly when
you have finished.
This can result in the entrance
becoming misaligned which can
negatively impact the function of
the zip and lead to damage.
STEP
6
Re-fit the frame pads as before with
the net laying on top of the bed.
With the frame pads now fitted, use the 16
bungee loops with Q hook to connect the
net to the steel enclosure poles.
Start by doing this at the middle-point of
the poles as they can be attatched whilst
standing on the ground.
Once completed, remove your footwear and enter the
trampoline through the door of the enclosure. Now you
can finish attaching the bungee loops to the net at the
top of the poles.
All 16 bungees should now be attached and the
enclosure fully assembled.
STEP
Completing the net
