(3.2) Install the SSD
(3.1) Taking a Picture of Existing Drive Connection
1. Safely shut down your computer and completely disconnect the power.
2. Remove the computer cover.
3. Connect cable(s) with SSD as shown in the picture you took at 3.1.
4. Replace the cover
5. Power on the PC
6. At the power up sequence, enter into the BIOS Set Up. Adjust the Boot Up
Sequence to recognize SSD.
7. Installation is complete
8. Now, you can start the OS installation. (If you are expert, you may use the
Clone software)
3. SSD Installation
4