• 9 •
•
Coil the input and output cords neatly when storing the charger. This will help
prevent accidental damage to the cords and charger.
•
Store the charger unplugged from the AC power outlet, in an upright position.
•
Store inside, in a cool, dry place. Do not store the clamps clipped together, on
or around metal, or clipped to the cables.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
Yellow LED is blinking
and display shows
CHARGE ABORTED–
BAD BATTERY.
The battery is sulfated.
The battery is too large
for the charger.
Reset the charger by
briefly unplugging it.
You need a charger with
a higher amp rate.
The display shows
CONNECT CLAMPS.
Clamps are not making
a good connection.
The fuse is bad.
Check for poor
connection at battery
and frame.
Replace the in-line fuse
for the ring connector.
The display shows
ANALYZING BATTERY
and yellow LED is lit.
The charger is checking
the condition of the
battery.
No problem; this is
normal.
SPECIFICATIONS
Input voltage ................................................................. 120V AC
@
60Hz, .91A
Output voltage ...................................... 6V or 12V, with Auto Voltage Detection
Output current rating ..............................................................3A
@
6V and 12V
REPLACEMENT PARTS
Cable battery assembly ..................................................................3899002636
Quick-connect cable with fuse ......................................................2299002042
Cord set with 12V cigarette adapter ...............................................3899001401
BEFORE RETURNING FOR REPAIRS
For troubleshooting info, contact customer service for assistance:
[email protected] • www.batterychargers.com
or call 1-800-621-5485, Monday-Friday 7:00
am
to 5:00
pm
CST
For
REPAIR OR RETURN
, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT
until you receive a
RETURN MERCHANDISE
AUTHORIZATION (RMA)
number from Customer Service at Schumacher
Electric Corporation.