12
X11SSM(-F)/X11SSL(-F) User Manual
Note:
Table is continued on the next page.
Quick Reference Table
Jumper
Description
Default Setting
JI
2
C1/JI
2
C2
SMB to PCI Slots
Pins 1-2 (Enabled)
JBR1
BIOS Recovery
Pins 1-2 (Normal)
JBT1
Clear CMOS
See Chapter 2
JPB1
BMC Enable/Disable
Pins 1-2 (Enabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1/JPL2
LAN1/LAN2 Enable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode Select
Pins 1-2 (Normal)
JWD1
Watch Dog Enable
Pins 1-2 (Reset)
LED
Description
Status
LE1
Rear UID LED
Bllue: On; Unit Identified
LEDBMC
BMC Heartbeat LED
Green: Blinking; BMC Normal
LEDPWR
Onboard Power LED
Green: Solid On; Power On
Connector
Description
BT1
Onboard Battery
COM1
COM1 Port Header
COM2
COM2 Port Header [X11SSM(-F) only]
Fan1-Fan4, FanA
System/CPU Fan Headers
IPMI LAN
Dedicated IPMI Gigabit (RJ45) Port (X11SSM-F & X11SSL-F only)
I-SATA0-I-SATA5
(Intel PCH) Serial ATA (SATA) 3.0 Ports
I-SATA6 & I-SATA7
(Intel PCH) Serial ATA (SATA) 3.0 Ports [X11SSM(-F) only]
I-SGPIO 1/2
Serial Link General Purpose I/O Connection Headers 1/2
JD1
Speaker/Power LED Indicator
JF1
Front Panel Control Header
JIPMB1
4-pin External BMC I2C Header (for an IPMI Card)
JL1
Chassis Intrusion Header
JPI
2
C1
Power System Management Bus (Power SMB)
JOH1
Overheat LED Indicator
JPWR1
24-pin ATX Main Power Connector (Required)
JPWR2
+12V 8-pin Power Connector (Required)
JSD1/JSD2
SATA DOM (Device_On_Module) Power Connectors
JSTBY1
Inject External P5V_STBY Power
JTPM1
Trusted Platform Module/Port 80 Connector
JUIDB1
Unit Identifier Switch
LAN1/LAN2
Gigabit (RJ45) Ports (LAN1/2)
PCI-E (CPU) Slot 7
PCI-Express 3.0 x8 Slot
PCI-E (CPU) Slot 6
PCI-Express 3.0 x8in x16 Slot