6
2
9
5
7
6
1
8
3
4
10
14
11
12
13
15
16
Engine
Primary Beam Kit
Bottom Plate
Supporting Bar
Wheels
Control Valve
Handle
Hydraulic Cylinder
Handle
Oil Hose
Hexagon Socket Head
Cap Screw M10x 35mm
Hexagon Flange
Bolt M8x20mm
Hexagon Flange
Bolt M8x40mm
Hose Clamp Flat Washer Cotter Pin Spring Washer
Flange Nut
Plug of Oil Dipstick
CONTROLS AND FEATURES
1. Handle
2. Splitting Wedge
3. Support Leg – Supports log splitter while operating.
4. Splitting Support Beam---
DO NOT PUNCTURE
The hydraulic tank is inside.
5. Hydraulic cylinder base.
6. 10" Wheels
7. Hydraulic Oil Dipstick – Add or check Hydraulic oil level.
8. Hydraulic Cylinder – Converts hydraulic pressure into linear force.
9. Control Valve Handle – Controls the movement of the thrust plate.
10. Engine 209cc 4-stroke, air cooled.
11. Hydraulic Oil Return (Low Pressure) Hose – returns hydraulic oil back into the hydraulic tank.
12. Suction Hose – Draws hydraulic oil from the tank into the pump.
13. Hydraulic Pump – Pumps hydraulic oil through the system.
14. Engine Oil Fill Cap / Dipstick – Add or check the motor oil level.
15. Hydraulic Oil Inlet (High Pressure) Hose – Feeds hydraulic oil into the hydraulic cylinder.
16. Fuel filler tank cap.
PARTS LIST
