background image

3

Use extreme caution when storing, handling and using fuels, as they are highly volatile 

and explosive in vapor state.

Safety

General Safety Rules

Understand Your Machine 

1. Read and understand the operator's manual and labels affixed to the machine. Learn its 

application and limitations as well as the specific potential hazards peculiar to it.

2. Be thoroughly familiar with the controls and their proper operation. Know how to stop the 

machine and disengage the controls quickly.

3. Make sure to read and understand all the instructions and safety precautions as outlined in 

the Engine Manual, packed separately with your unit. Do not attempt to operate the machine 

until you fully understand how to properly operate and maintain the Engine and how to avoid 

accidental injuries and/or property damage.

Work Area 

1. Never start or run the engine inside a closed area. The exhaust fumes are dangerous, 

containing carbon monoxide, an odorless and deadly gas. Operate this unit only in a well 

ventilated outdoor area.

2. Never operate the machine without good visibility or light.

Personal Safety 

1. Do not operate the machine while under the influence of drugs, alcohol, or any medication 

that could affect your ability to use it properly.

2. Dress properly. Wear heavy long pants, boots and gloves. Do not wear loose clothing, short 

pants, jewelry of any kind. Secure long hair so it is above shoulder level. Keep your hair, 

clothing and gloves away from moving parts.Loose clothes, jewelry or long hair can be 

caught in moving parts.

3. Check your machine before starting it. Keep guards in place and in working order. Make sure 

all nuts, bolts, etc. are securely tightened.

4. Never operate the machine when it is in need of repair or is in poor mechanical condition.

5. Replace damaged, missing or failed parts before using it. Check for fuel leaks. Keep the 

machine in safe working condition.

6. Do not use the machine if the engine's switch does not turn it on or off. Any gasoline 

powered machine that can not be controlled with the engine switch is dangerous and must 

be replaced.

Read these instructions

for use carefully.

Wear eye protection.

Wear hearing protection.

Wear protective gloves.

Wear safety footwear.

It is forbidden to remove or tamper

with the protection devices and 

safety devices.

Do not smoke or have open flames.

Keep away from rotating parts.

Do not touch parts which are hot 

from operation. Serious burns may

result.

Keep children and bystanders off and away.

Содержание GUO039





















Отзывы:

Похожие инструкции для GUO039