14
www.supercircuits.com
SECTION 3: SETUP MENU USAGE
DAY / NIGHT
•
AUTO
: This mode is set for color in a normal environment, but switches to B / W
mode when ambient illumination is low. To set up the switching time or speed for
AUTO mode.
—
D
g
N LEVEL
: Adjust the Start Night level. Range: 0 to 255 steps
—
D
g
N DELAY
: Adjust the Start Night Delay time. Options: 1 / 3 / 5 / 10 / 15 /
20 / 25 / 30 seconds.
—
N
g
D LEVEL
: Adjust the End Night level. Range: 0 to 255 steps
—
N
g
D DELAY
: Adjust the End Night Delay time. Options: 1 / 3 / 5 / 10 / 15 /
20 / 25 / 30 seconds.
•
COLOR
: The picture is always displayed in color.
•
B / W
: ON / OFF. When ON, the picture is always displayed in black and white.
—
BURST
: ON / OFF. Burst signal is off during B/W mode.
—
IR SMART
:
ON / OFF
.
IR GAIN
: 0 ~ 255 steps; HEIGHT: 0 ~ 8 steps;
WIDTH
: 0 ~ 13 steps;
LEFT/RIGHT
: 0 ~ 7 steps;
TOP/BOTTOM
: 0 ~ 10 steps
—
IR LEVEL
: LOW / HIGH
•
EXT
: This mode is used to apply a filter to external signals.
NOTE
- When using a video auto-iris lens, automatic switching between Color and B/W may
not occur if the level is set too low.
- The AGC in the EXPOSURE menu is “OFF” when DAY / NIGHT menu is “AUTO”.
- If using IR illumination, install an Extra-low Dispersion Lens to improve camera focus.
- For IR models, the Day and Night menu contains only the “Auto” option.
