manualshive.com logo in svg

Super Circuits DMR90U, Инструкция по установке и настройке


Поделиться
Скачать
background image

ii

www.supercircuits.com

CAUTION

Operate this device only in environments where the temperature or humidity is within the recommended range. Operation 
at extreme temperatures or in very high or low humidity levels may cause electric shock and shorten the life of the 
product. 

CAUTION

Installation and servicing should be performed by qualified and experienced personnel only. DVR should always remain 
OFF during any installation process.

CAUTION

Do not use the camera if fumes, smoke or a strange odor is emitted from the unit, or if it seems to function incorrectly. 
Disconnect the power source immediately, and consult your dealer.

LEGAL NOTICE 

Supercircuits products are designed to meet safety and performance standards with the use of specific 

Supercircuits authorized accessories. Supercircuits disclaims liability associated with the use of non-Supercircuits 

authorized accessories.
The recording, transmission, or broadcast of any person’s voice without their consent or a court order is strictly 

prohibited by law.
Supercircuits makes no representations concerning the legality of certain product applications such as the 

making, transmission, or recording of video and/or audio signals of others without their knowledge and/or 

consent. We encourage you to check and comply with all applicable local, state, and federal laws and regulations 

before engaging in any form of surveillance or any transmission of radio frequencies.

Microsoft

, 

Windows

, and 

Internet Explorer

 are either registered trademarks or trademarks of Microsoft Corporation in 

the United States and/or other countries. 

Android

 is a trademark of Google Inc. Use of this trademark is subject to 

Google Permissions. 

Apple

, 

iPhone

,

 iPod touch

, and

 

iPad

 

are registered trademarks of Apple Inc. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks 

and names or their products. Supercircuits, Inc. disclaims any proprietary interest in trademarks and trade names 

other than its own.
No part of this document may be reproduced or distributed in any form or by any means without the express written 

permission of Supercircuits, Inc.

© 2012 Supercircuits, Inc. All rights reserved.

11000 N. Mopac Expressway, Building 300, Austin, TX 78759 

Sales/Support: 1.800.335.9777 | Fax: 1.866.267.9777

Содержание DMR90U

































































































Отзывы:

Нет отзывов

Похожие инструкции для DMR90U

Q-See QT454-403-5 User Manual preview
QT454-403-5
Бренд: Q-See Страницы: 34
Seorim Technology AKR-100 Quick Manual preview
AKR-100
Бренд: Seorim Technology Страницы: 2
Avtech 4713218632821 Quick Start Manual preview
4713218632821
Бренд: Avtech Страницы: 17
HEXA STANDALONE DVR HSDVR-3308A Instruction Manual preview
STANDALONE DVR HSDVR-3308A
Бренд: HEXA Страницы: 64
XVision EVD8P User Manual preview
EVD8P
Бренд: XVision Страницы: 57
SVAT ClearVu CVDVR900 User Manual preview
ClearVu CVDVR900
Бренд: SVAT Страницы: 24
Fostex D-30 Owner'S Manual preview
D-30
Бренд: Fostex Страницы: 160
Advanced Technology Video A-ADT4HS2 Quick Reference Manual preview
A-ADT4HS2
Бренд: Advanced Technology Video Страницы: 2
Advanced Technology Video QuadraSplit 421SS Owner'S Manual And Operating Instructions preview
QuadraSplit 421SS
Бренд: Advanced Technology Video Страницы: 8
HIKVISION DS-7104NI-SL/W Quick Operation Manual preview
DS-7104NI-SL/W
Бренд: HIKVISION Страницы: 26
Goodmans VN9800S Instruction Manual preview
VN9800S
Бренд: Goodmans Страницы: 32
Ness 16-channel models User Manual preview
16-channel models
Бренд: Ness Страницы: 97
ClearView PhoenixHP Quick Start Guid preview
PhoenixHP
Бренд: ClearView Страницы: 21
Elvox 46540.H16 Installation And Operation Manual preview
46540.H16
Бренд: Elvox Страницы: 96
HIKVISION DS-8004HCI-S Technical Manual preview
DS-8004HCI-S
Бренд: HIKVISION Страницы: 10
Swann DVR4-8500AI Specification Sheet preview
DVR4-8500AI
Бренд: Swann Страницы: 2
VC AVR-1612 Mounting And Operating Manual preview
AVR-1612
Бренд: VC Страницы: 44
Dahua G4-HDE Series Quick Start Manual preview
G4-HDE Series
Бренд: Dahua Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды